Nitin Chemicals




Constrabind NS-1001 V is a blend of different natural polymers specially formulated for the Ceramic industry, keeping the Gres Porcellanato(Vitrified Tiles) in mind. It can be used to overcome the problems of lower Green strength of vitrified tile body composition, thereby reducing wastage at Green stage. This can effectively result in lowering of cost of production and decreasing of raw material handling.

Constrabind NS-1001 V was designed specially to overcome these problems in the vitrified tile manufacturing process. The material can be directly added to the ball mill, in specified dosage. The material does not affect the rheological properties of the slip to which it is added. At the firing stage being a natural organic material it burns out completely at lower temperature and hence does not hamper the technical quality of the resulting tile.

TYPICAL PHYSICAL PROPERTIES :


Appearance	:	Off White coloured powder
pH	:	6.0 – 8.0
L O I	:	97 %
RECOMMENDED DOSAGE	:	0.05 – 0.20 % By Weight

ADVANTAGES :

Constrabind NS-1001 V is a Dry powder – hence easier handling.
Constrabind NS-1001 V does not leave behind any Black/Pink core.
Constrabind NS-1001 V can be directly added in the ball milling with initial charge.
Constrabind NS-1001 V does not affect viscosity of the slip.
Constrabind NS-1001 V is completely water soluble.
Constrabind NS-1001 V is suggested to add alongwith STPP in continuous Ball Mill for better effectivity.
Constrabind NS-1001 V reduces green tile wastage significantly and helps in lowering the cost of finished product.
Constrabind NS-1001 V helps in reducing the costlier & imported High Plastic clays with localized clays.
Constrabind NS-1001 V may help in reducing firing cycle.
Constrabind NS-1001 V will help in making bigger sized tiles (sizes excessive of 800mm x 800mm).
Constrabind NS-1001 V is compatible with any type of Clay as well with any type of Body formulations.

PACKING :

Packing available in 25 Kgs. Bags with inner liner.

Constrabind NS – L4(E) is a blend of different natural polymers specially formulated for the Ceramic industry, keeping the Gres Porcellanato (Vitrified Tiles) in mind. It can be used to overcome the problems of lower Green strength of vitrified tile body composition. This can effectively result in lowering of cost of production and decreasing of raw material handling.

Constrabind NS – L4(E) can be directly added to the ball mill, in specified dosage. The material does not affect the rheological properties of the slip to which it is added. At the firing stage being a natural organic material it burns out completely at lower temperature and hence does not hamper the technical quality of the resulting tile.

TYPICAL PHYSICAL PROPERTIES :


Appearance	:	Off White to Light Yellow coloured powder
pH	:	6.0 – 8.0
L O I		92 - 94 %
RECOMMENDED DOSAGE	:	0.05 – 0.20 % By Weight.

ADVANTAGES :

CONSTRABIND NS L4(E) is a Dry powder – hence easier handling.
CONSTRABIND NS L4(E) does not leave behind any Black/Pink core.
CONSTRABIND NS L4(E) can be directly added in the ball milling with initial charge.
CONSTRABIND NS L4(E) does not affect viscosity of the slip.
CONSTRABIND NS L4(E) is completely water soluble.
CONSTRABIND NS L4(E) is suggested to add alongwith STPP in continuous Ball Mill for better effectivity.
CONSTRABIND NS L4(E) reduces green tile wastage significantly and helps in lowering the cost of finished product.
CONSTRABIND NS L4(E) helps in reducing the costlier & imported High Plastic clays with localized clays.
CONSTRABIND NS L4(E) may help in reducing firing cycle.
CONSTRABIND NS L4(E) will help in making bigger sized tiles (sizes excessive of 800mm x 800mm).
CONSTRABIND NS L4(E) is compatible with any type of Clay as well with any type of Body formulations.

PACKING :

Packing available in 25 Kgs. Bags with inner liner.