Constrabind NS 2001 is a blend of different natural polysaccharides specially formulated for refractory industry. It can be used to overcome the problems of lower strength in the green ware. The increase in green strength will help reduce the wastage at green stage and better and sharper edges in shaped refractories.
 
 
Constrabind NS 2001 has to be added to the refractory body at the dry mixing stage. It need to be added in dry powder form alongwith other materials and followed by wet mixing.
 
 
TYPICAL PHYSICAL PROPERTIES:
     
Appearance : Off White to Light Yellow coloured Powder
pH : 6.0 – 8.0
L O I : 90 %
RECOMMENDED DOSAGE : 0.15 to 0.20% by Weight depending on the formulation & application.


 
ADVANTAGES :
 
 
  • Constrabind NS 2001 is a dry powder which is easier to handle and is water soluble.
  • Constrabind NS 2001 can be added directly as in powder form or as a solution in the beginning of mixing so no need to make separate arrangements for addition.
  • Constrabind NS 2001 is used in very low dosages compared to existing binders, thereby cost effective and also Constrabind NS 2001 is very user friendly product.
  • Constrabind NS 2001 may reduces requirement of water in the refractory body thereby helps in easier drying.
  • Constrabind NS 2001 reduces the green ware wastage & results in sharper edges in finished wares.
  • Constrabind NS 2001 reduces the requirement of clay as binder in high Alumina and other similar ceramics.
  • Constrabind NS 2001 is compatible with any body formulation of High Alumina shaped refractories.

 

PACKING:

Packing available in 25 Kgs. of polythene lined HDPE bags.

 
 
 
 
Constrabind NS 2004 is a blend of different natural polysaccharides specially formulated for refractory industry. It can be used to overcome the problems of lower strength in the green ware. The increase in green strength will help reduce the wastage at green stage and better and sharper edges in shaped refractories.
 
 
Constrabind NS 2004 has to be added to the refractory body at the dry mixing stage. It need to be added in dry powder form alongwith other materials and followed by wet mixing.
 
 
TYPICAL PHYSICAL PROPERTIES:
     
Appearance : Off White to Light Yellow coloured Powder
pH : 6.0 – 8.0
L O I : 90 %
RECOMMENDED DOSAGE : 0.1 – 0.3% by Weight depending on the formulation & application.


ADVANTAGES :
 
  • Constrabind NS 2004 is a dry powder which is easier to handle and is water soluble
  • Constrabind NS 2004 can be added directly as in powder form or as a solution in the beginning of mixing so no need to make separate arrangements for addition.
  • Constrabind NS 2004 is used in very low dosages compared to existing binders, thereby cost effective and also Constrabind NS 2004 is very user friendly product.
  • Constrabind NS 2004 may reduces requirement of water in the refractory body thereby helps in easier drying.
  • Constrabind NS 2004 reduces the green ware wastage & results in sharper edges in finished wares.
  • Constrabind NS 2004 reduces the requirement of clay as binder in high Alumina and other similar ceramics.
  • Constrabind NS 2004 can be used in Insulation bricks and in turn may reduce Bulk Density.
  • Constrabind NS 2004 is compatible with any body formulation of Silica / High Alumina / Insulation shaped refractories.

 

PACKING:

Packing available in 25 Kgs. Bags with inner liner.

 
 
 




   Copyright © 2008-2009 Nitin Chemicals